Hose and Tubing
Ferrule Fittings (Swage Type) with Electrolytic Polishing
March 11,2019 Hose and TubingFlexible Fluorine Resin Hose SeriesFittings and AccessoryFittings
Applicable Hose *Regarding your inquiry of ferrule fittings, please fill out the form below. Please make sure to review "How to Choose Hoses and Ferrule Fittings" and specify the part number (Example: E-SJB-19-F15A-EP-1,000L) and quantity. If there are any other requests, please write down in "Your Message" Section on the form.
Flexible Fluorine Resin Hose Series with Ferrule Fittings (Swage Type)
March 11,2019 Hose and TubingFlexible Fluorine Resin Hose SeriesFittings and AccessoryFittings
How to choose hoses and ferrule fittings Free of Charge: Laser-Marking Service How to place an order of Ferrule Fittings (Swage Type) A: Decide Hose Model Number: Choose the best hose (hose sizes) for your applications and fitting model you selected. B: Decide Fitting Model: Either F15A, F1S, F1.25S or F1.5S C (Optional) Decide you ...
Barrier Tubing (Olefin) [Model Number: E-BTO]
November 22,2021 Hose and TubingInk-Jet Printer Hose Series
Point: Cautions: The material of the middle layer and outer layer is inferior in chemical resistance to the inner layer. Do not allow chemicals to adhere to the tube during immersion or fitting insertion as it may cause swelling and cracking of the tube. When using the metal fittings, do not use any scratches or ...
Barrier Tubing Black (Fluorine) [Model Number: E-BTF-BK]
October 23,2022 Hose and TubingInk-Jet Printer Hose Series
Point: Cautions: The material of the middle layer and outer layer is inferior in chemical resistance to the inner layer. Please do not allow chemicals to adhere to the tube during immersion or fitting insertion, which might cause swelling and cracking of the tube. When using the metal fittings, do not use any scratches or ...
Barrier Tubing (Fluorine) [Model Number: E-BTF]
September 09,2022 Hose and TubingInk-Jet Printer Hose Series
Point: Cautions: The material of the middle layer and outer layer is inferior in chemical resistance to the inner layer. Please do not allow chemicals to adhere to the tube during immersion or fitting insertion, which might cause swelling and cracking of the tube. When using the metal fittings, do not use any scratches or ...
SUNFOODS HOSE [Model Number: E-SF]
May 05,2018 Hose and TubingFood and Beverage Hose Series
Cautions: Due to the yarn-reinforced hose, please use the joints to seal an inner surface of the hose. Please do not use the joints to seal an outer surface of the hose. This may result in the bursting or coming off from the hose. When you use our products, please refer to "Precautions for Use." ...
Solvent Transfer Hose [Model Number: E-SV]
May 06,2018 Hose and TubingPaint Hose Series
Cautions: Due to the laminated structure hose, please use the joints to seal an inner surface of the hose. Please do not use the joints to seal an outer surface of the hose. This may result in the bursting or coming off from the hose. When you use our products, please refer to "Precautions for ...
Pump Tubing (Styrene Type) [Model Number: PST]
June 10,2020 Hose and TubingMade-to-Order Hose
Chemical Resistance Data $\bigcirc$: Can be used without any influence, or almost no influence on material. $\triangle$: Can be used though having an influence on material to some extent. Additional check before in use is required. $\times$: Cannot be used. - : No Data Cautions: Please note that we do not have our original fittings ...
Pump Tubing (Olefin Type) [Model Number: POL]
May 25,2020 Hose and TubingMade-to-Order Hose
■Chemical Resistance Data $\bigcirc$: Can be used without any influence, or almost no influence on material. $\triangle$: Can be used though having an influence on material to some extent. Additional check before in use is required. $\times$: Cannot be used. - : No Data Cautions: Please note that we do not have our original fittings ...
Heat Resistant Soft Tubing 100℃ [Model Number: E-HRT]
October 10,2022 Hose and TubingFood and Beverage Hose Series
Cautions: Please use the joints to seal an inner surface of the tubing. In case you use the joints to seal an outer surface of the tubing, the bursting and/or coming off from the tubing might occur. Please do not use E-HRT for lubricating oil and solvents. Please do not let E-HRT contact with PVC ...
