SUNFOODS HOSE [Model Number: E-SF]

*Please note that the value of "Minimum Bend Radius" is NOT equal to that of "Flexibility." About "Flexibility," please contact us and request the sample.

Cautions:

Due to the yarn-reinforced hose, please use the joints to seal an inner surface of the hose.
Please do not use the joints to seal an outer surface of the hose. This may result in the bursting or coming off from the hose.
When you use our products, please refer to "Precautions for Use." ("The Precautions for Use" of E-SF is also downloadable here.)
In terms of chemical resistance, please refer to "Chemical Resistance Data."

Frequently Asked Questions

Question: Is E-SF certified with FDA?
Answer: No, E-SF is not certified with FDA. Instead, we have a certificate of the Food Sanitation Law No.370 (No.370 of the Ministry of Health and Welfare for Food Sanitation). (Conformity to N-Heptane).

Question: Can we use E-SF for transferring oils?
Answer: Yes, since the high polymer oil-proof plasticizer is used, E-SF is less likely to become hardened than E-STB ("Oil-Proof PRESSURE HOSE"). Thus, you can transfer oils other than food grade oils.

Question: How do we wash out the food grade hose?
Answer: To wash out the inner layer of the hose, we recommend you to use a sponge ball and rocket brush.

Model Number	Standard Length	I.D. $\times$ O.D.	Working Pressure	Working Pressure	Minimum Bend Radius
	Standard Length	I.D. $\times$ O.D.	20$^\circ$C	20$^\circ$C	20$^\circ$C
	m	mm	MPa	Bar	mm
E-SF-6	100	6 $\times$ 11	0 - 1.0	0 - 10	35
E-SF-8		8 $\times$ 13.5			50
E-SF-9		9 $\times$ 15			55
E-SF-10		10 $\times$ 16			60
E-SF-12		12 $\times$ 18			70
E-SF-15	50	15 $\times$ 22			80
E-SF-19		19 $\times$ 26			115
E-SF-25		25 $\times$ 33			150
E-SF-32	40	32 $\times$ 41	0 - 0.5	0 - 5	190
E-SF-38		38 $\times$ 50	0 - 0.5	0 - 5	230
E-SF-50		50 $\times$ 63	0 - 0.3	0 - 3	300

Product Name	Materials, Characteristics
EIGHTLOCK S Fittings [Model Number: E-ELS]]	Material: SUS304 (SS304) (Body, Ring, Nut), POM (Sleeve) Our Nut Type Original Made-in-Japan Fittings Since the inner layer of the fitting is flat and does not use the rubber packing, fluid accumulation is unlikely to occur. Thus, it is easy to wash out. Since you do not need hose clamp and the controlling torque value, you can standardize how to install the fitting.

EIGHTLOCK B Fittings [Model Number: E-ELB]]	Material: BSBM (Body, Ring, Nut), POM (Sleeve) Our Nut Type Original Made-in-Japan Fittings Since the inner layer of the fitting is flat and does not use the rubber packing, fluid accumulation is unlikely to occur. Thus, it is easy to wash out. Since you do not need hose clamp and the controlling torque value, you can standardize how to install the fitting.

EIGHTNIPPLE S Fittings [Model Number: E-FTS]]	Material: SUS316L (SS316L) SUS316L (SS316L) is superior in corrosion resistance, so you can transfer a wide range of fluids. Two-stage flat nipple structure which maximizes hose pressure Our Original Barb Nipple Fittings Made-in-Japan Fittings

EIGHTNIPPLE B Fittings [Model Number: E-FTB]]	Material: BSBM (Brass) Compliant with RoHS2 requirement Two-stage flat nipple structure which maximizes hose pressure Our Original Barb Nipple Fittings Made-in-Japan Fittings

EIGHTLOCK Ferrule Fittings [Model Number: E-ELF]]	Material: Body: SCS16, Nut and Ring: SCS13 (Sleeve: POM) You can replace a hose even though the hose needs replacement, since EIGHTLOCK Ferrule Fitting is a nut ferrule fitting. You can install and detach the fitting on site. You can make use of a wide range of usages such as pipes for chemicals, food, beverage and alcohol. The nipple end is less likely to accumulate fluids, so you do not have to worry about contamination very much.

EIGHTLOCK Ferrule Fittings with PFA Lining [Model Number: E-ELF-PFA]]	Material：Body: SCS16, Wetted Part: PFA Lining, Nut and Ring: SCS13 (Sleeve: POM) Due to PFA Lining, you can transfer fluids that are not possible for metal fittings. You can replace a hose even though the hose needs replacement, since EIGHTLOCK Ferrule Fitting is a nut ferrule fitting. You can install and detach the fitting on site. You can make use of a wide range of usages such as pipes for chemicals, food, beverage and alcohol. The nipple end is less likely to accumulate fluids, so you do not have to worry about contamination very much.

EIGHTLOCK S Fittings (with Hose Guide) [Model Number: E-ELS-GN]]	Material: SUS304 (SS304) (Body, Ring, Nut), POM (Sleeve) Our Nut Type Original Made-in-Japan Fittings with Hose Guide Since the inner layer of the fitting is flat and does not use the rubber packing, fluid accumulation is unlikely to occur. Thus, it is easy to wash out. Since you do not need hose clamp and the controlling torque value, you can standardize how to install the fitting.

MENU

Fluids

Applications

Functions

Characteristics

Certificates and Regulations

Packing Images

Product Standard

Frequently Asked Questions

Technical Information

HAKKO Original Fittings for E-SF

HAKKO Original Accessory for E-SF

NEWS