Resin Hose Manufacturer in Japan
PRODUCTS

Fittings

Fittings for Multi-Layer Tubing [Model Number: E-FTS-F]

Specification: Applicable Hose Size *(A) Working pressure of E-SJUS-4$\times$6/E-SJUS-4$\times$6-BK (20$^\circ$C) is 0 - 0.4 MPa. *(B) Working pressure of E-SJUS-6$\times$8/E-SJUS-6$\times$8-BK (20$^\circ$C) is 0 - 0.3 MPa. How to Assemble Fittings for Multi-Layer Tubing

PEEK (Carbon Reinforced) Nut Type Fittings [Model Number: AL]

Matching Evaluation Test Data Cautions: These data are test values and not guaranteed values. Please make a judgment on your own when you use this product. The burst test values by temperature are burst pressure data, not working pressure. Check the working pressure of each tube for safety use. The pull strength is the value ...

Fittings for Paint-Flex Hose Series [Model Number: E-FS/E-FB]

Cautions: Although the part number size is not the same as E-AHG-8.5, we guarantee that E-FB-8.9-G1/4 and E-FB-8.9-G3/8 can be used for E-AHG-8.5. If you request our technical data on this, feel free to ask us. How to Install the Fittings and Fittings' Selection Advice How to differentiate SUS fittings from Brass fittings Applicable Hoses ...

Fittings for Paint-Flex Hose Series [Model Number: E-FSG/E-FBG]

Cautions: Although the part number size is not the same as E-AHG-8.5, we guarantee that E-FBG-8.9-G1/4 and E-FBG-8.9-G3/8 can be used for E-AHG-8.5. If you request our technical data on this, feel free to ask us. How to Install the Fittings and Fittings' Selection Advice With/Without Spring Guards Applicable Hoses (A) Paint Flex-Nylon Hose [Model ...

Push-to-Connect Fittings for Air Hose Series [Model Number: E-RSS/E-RSP]

How to Install the Fittings Applicable Hose (A) NEW FLEX Air Hose [Model Number: E-NF] (B) Soft NEW FLEX Air Hose [Model Number: E-SNF] (C) Soft NEW FLEX Air Hose (Red Color) [Model Number: E-SNF-RED] Frequently Asked Question Question: Can we install E-RSS/E-RSP with Air Hose by ourselves? Answer: Yes, you can install E-RSS/E-RSP Fittings ...

Fittings for Solvent Transfer Hose [Model Number: E-EM]

How to Install the Fittings and Fittings' Selection Advice Applicable Hoses Solvent Transfer Hose [Model Number: E-SV]

Flexible Fluorine Resin Hose Series Ferrule Fittings (Swage Type) with PFA Lining

How to Choose Hoses and Ferrule Fittings How to place an order of Ferrule Fittings (Swage Type) A: Decide Hose Model Number: Choose the best hose (hose sizes) for your applications and fitting model you selected. B: Decide Fitting Model: Either F15A, F1S, F1.25S or F1.5S C: Decide the Total Length: Please refer to the ...

Flexible Fluorine (PVDF) Resin Yarn Reinforced Hose with PFA Lining Ferrule Fittings [Model Number: E-PDB-F-PFA]

Frequently Asked Question Question: What is the minimum length of Ferrule Fittings Products for each size? Answer: Please refer to the table below. Question: What is the difference between E-PDB-F and E-PDB-F-PFA? Answer: E-PDB-F-PFA adds an lining coating onto the ferrule fittings. Thus, fluids such as strong acid will be transportable through E-PDB-F-PFA.

Flexible Fluorine (ETFE) Resin Yarn Reinforced Hose with PFA Lining Ferrule Fittings [Model Number: E-SJB-F-PFA]

Frequently Asked Question Question: What is the minimum length of Ferrule Fittings Products for each size? Answer: Please refer to the table below. Question: What is the difference between E-SJB-F and E-SJB-F-PFA? Answer: E-SJB-F-PFA adds an lining coating onto the ferrule fittings. Thus, fluids such as strong acid will be transportable through E-SJB-F-PFA.

« 1 2 3 »

NEWS

banner_RoHS2
banner_Chemical-Resistance-Data
banner_Questions-and-Answers
banner_Precautions-for-Use
banner_Sample-Request
banner_Products-for-Ink-Jet-Printers
banner_About-Purchasung-outside-Japan
PAGETOP
Copyright © HAKKO CORPORATION All Rights Reserved.